info@voip-sip-sdk.com Tel: +36 1 371 0150

How to setup Ozeki VoIP SIP SDK with Gafachi

Follow this step by step configuration guide to setup Ozeki VoIP SIP SDK to make VoIP calls from your application. It is simple and quick to get started.

In order to setup your system, first you need to download and install Ozeki VoIP SIP SDK. You also need to create a Gafachi account if don't have one. After these basic steps please follow the configuration steps below.

Ozeki VoIP SIP SDK can be obtained
by clicking the download link below:
Download Ozeki VoIP SIP SDK!

Figure 1 demonstrates the simple operation of Ozeki VoIP SIP SDK with Gafachi. After you configured the connection your system is ready to start VoIP calls from Ozeki VoIP SIP SDK via Gafachi to any cellphone or landline phone.


Figure 1 - Connection with Gafachi

  1. Register a Gafachi account and add credit to your account.
  2. Ozeki VoIP SIP SDK will register to your Gafachi account.
  3. Start calling your phone numbers.
  4. Ozeki VoIP SIP SDK will call your contacts via the registered Gafachi account.

Configuration guide

Before you begin it is assumed that you already have a Gafachi account and you have credit on your account. You can use this account to make phone calls via Gafachi.

Step 1.) Configure Gafachi

First, open your web browser and navigate to the website of Gafachi.
Type http://gafachi.com/
Once the website is loaded in your browser, you can login with your Gafachi account (Figure 2).


Figure 2 - Login with your Gafachi account

Click on Configuration information under Technical info to view your SIP settings (Figure 3).


Figure 3 - Click on Configuration information

Now you see your SIP information in your Gafachi account. You can use this information to connect Ozeki VoIP SIP SDK to your Gafachi account (Figure 4).


Figure 4 - SIP information

The next step is to configure your Ozeki VoIP SIP SDK to connect to your Gafachi account.

Step 2.) Configure Ozeki VoIP SIP SDK

Before you begin to configure Ozeki VoIP SIP SDK, it is assumed that you have already downloaded Ozeki VoIP SIP SDK from the download page and installed it into your computer.

With the default installation, the Demo Application will be installed into your computer. Start the Demo Application and provide the SIP information - you can see SIP information in your Gafachi account - into the SIP Account Settings tab and click on Register (Figure 5).


Figure 5 - Provide SIP information

You can see the successfully registered line at the Phone Lines section. Dial a phone number, e.g.0036301234567, and click on Pick up (Figure 6).


Figure 6 - Dial a phone number

At the destination phone you can see an incoming call from Ozeki VoIP SIP SDK. The call is established via your Gafachi account (Figure 7).


Figure 7 - Incoming call from Ozeki VoIP SIP SDK

If you pick up the destination phone, the call state will change to InCall. The active phone call will be visible at the Phone Calls section (Figure 8).


Figure 8 - Active phone call

Conclusion

Now the configuration is done, and you have a working system which is connected to your Gafachi account. You can build your own VoIP application by using your Gafachi account.

If you have any questions, do not hesitate to contact us at: info@voip-sip-sdk.com

Related Pages

Ozeki Cookie Policy
Ozeki Informatics Ltd uses cookies to provide you the best experience on this website. The further use of the website will be considered as an agreement to the use of cookies. For more information read this website.

Cookies are enabled You are browsing the optimized version of this website. For more information read this website.